Tail Lift Products

Suitable for heavy duty loads, our column or rail lifts have heavy duty steel platforms with continuous welds all round. They come with dual controls and completely covered power units. All wear parts are bolt off and adjustable. Lifts that are 1000kg and up have a platform depth of 1050mm while lifts that are 500 - 800kg have a platform depth of 800mm. There is an option to extend all platforms.

enquire

Click to enlarge

We offer 2 different types of tuck away lifts. Our local, steel platform, that has a single cylinder tuck away platform that has a standard platform of 1050mm but can be extended. They come in 500kg, 750kg, 1000kg and 1500kg options.

We also import Zepro tuck away lifts from Sweden which have an aluminium platform and are also single cylinder lifts with a platform depth of 1415mm. They come in 1500kg and 2000kg options.

enquire

Click to enlarge

Cantilever lifts are the latest design in lifts and are suitable for all types of vehicles and applications. The advantage of a cantilever lift is that the platform may be extended up to 2400mm in depth. The lift is fully automatic and is able to tilt up or down and can act as a dock leveller. Door rubbers can be fitted to the rear door frame so that the platform in the closed position acts as the rear door.

enquire

Click to enlarge

ZEPRO sliders are tail lifts which are installed under the vehicle chassis. They can be used on trucks or semi-trailers. Their positioning allows unhindered access to the rear doors of the body whilst simultaneously providing the option of having a tail lift when required. It is a flexible solution and often means that these lift types are less regularly used than standard cantilevers. The platform is folded so that it takes up less rear overhang than would otherwise be the case. Single and double folding platforms are possible and material combinations of aluminium/aluminium or steel/aluminium are offered for the first and second parts of the platform respectively. Sliders are available with lifting capacity of 750kg all the way up to 2500kg.

enquire

Click to enlarge

Our wheelchair lift is a robust double cylinder lift with a full aluminium or mesh platform which lifts up to 350Kg. It has been designed to lift larger and heavier wheelchairs safely. There are twin pillars which ensure its stability. It is fully automatic which eliminates the need for the operator to lift or bend, reducing fatigue and the risk of injury. It is simple and safe to operate using a 2 button, hand held control. It is suitable for a wide range of vehicles with a maximum floor height of 930mm.

enquire

Click to enlarge

We also produce a robust double cylinder lift with either steel, mesh or aluminium platform which lifts up to 500Kg's. It comes in various platform sizes (width and length) to suit the customer's individual needs. Suitable for a wide range of vehicles to a maximum floor height of 1300mm.

enquire

Click to enlarge

Equestrian Horse Box Ramps

Single or Double Cylinder equestrian ramp systems depending on our customer's needs.

Double Cylinder Stage Lifts

Suitable for truck and trailer sides. We work closely with the customer to ensure that we capture their precise needs.

Double Tier Lifts

These are column lifts which allow customers to pack double volume into their trucks or trailers.

Single and Double Tier Racing Car Lifts

Built fully automatic with a platform length of 4.6m (including pull out ramps). Can be done double or single tier allowing for double volume usage within the truck or trailer. These are made with a steel frame structure and an aluminium deck to try and keep the weight of the lift at a minimum.

enquire

Click to enlarge

WM Light 80 Loading Ramp

WM Light is made of aluminium and is extremely light due to its spring assisted system. The ramp can be directly opened onto the ground without the use of feet and is available with an anti-slip aluminium surface.

enquire

Click to enlarge